Most digital safes will emit a beeping noise when a new combination has been set. Enter your new combination on the safe's interior keypad and hit the 'set' button.It may be necessary to hold the button down for ten seconds or so. Push the rod into the safe and hit the 'reset' button on the interior keypad. An uncoiled wire hanger is a good option, but you can use whatever you want as long as it gets the job done. Once you have located your safe's interior keypad, find a rod that is long and thin enough to fit through the corresponding bolt opening.Move from bolt opening to bolt opening until you find one that allows you to clearly see the safe's interior keypad. Once you have located your safe's bolt openings, take a flashlight and shine it through each opening.Some smaller digital safes may have their bolt openings on the base. These bolt openings can usually be found on the back of the safe. To do this you must first locate the safe's bolt openings. But if your safe doesn't then you need to press the reset button. Some digital safes have emergency keys.Neglecting to do so may result in the safe failing to lock or the emergency key failing to work the next time you need it. Be sure to return the key to its original position before removing it. Insert the emergency key into the emergency keyhole and turn it until the safe opens.You might find your safe's emergency keyhole to the side of the dial. It's worth noting that not all manufacturers place the emergency keyhole beneath the dial. The emergency keyhole is usually designed to blend in with the safe, so you may not spot it right away. There you should find a small round notch. Once you have removed the dial panel, take a look beneath the dial itself.Attempting to pry the panel from the dial using a fork or similar tool is ill-advised and will likely damage the exterior of your safe. Removing the dial panel is usually fairly easy and can be done using your bare hands. Remove the panel that covers your safe's dial.Otherwise you would need to crack the safe by force. Let's hope you can remember where you put it, because you're going to need it to properly open the safe without the combination. You almost definitely received an emergency key when you purchased your safe. First you must find the safe's emergency key.

Remington gun safe lost combination